Chapters

Hide chapters

Git Apprentice

First Edition · Git 2.28 · Console

Section I: Beginning Git

Section 1: 12 chapters
Show chapters Hide chapters

3. Committing Your Changes
Written by Sam Davies & Chris Belanger

The previous chapter showed you how to clone remote repositories down to your local system. At this point, you’re ready to start making changes to your repository. That’s great!

But, clearly, just making the changes to your local files isn’t all you need to do. You’ll need to stage the changes to your files, so that Git knows about the changes. Once you’re done making your changes, you’ll need to tell Git that you want to commit those changes into the repository.

What is a commit?

As you’ve probably guessed by now, a Git repo is more than a collection of files; there’s quite a bit going on beneath the surface to track the various states of your changes and, even more importantly, what to do with those changes.

To start, head back to the homepage for your forked repository at https://github.com/[your-username]/ideas, and find the little “11 commits” link at the top of the repository page:

Click that link, and you’ll see a bit of the history of this repository:

Each of those entries is a commit, which is essentially a snapshot of the particular state of the set of files in the repository at a point in time.

Generally, a commit represents some logical update to your collection of files. Imagine that you’re adding new items to your ideas lists, and you’ve added as many as you can think of. You’d like to capture that bit of work as a commit into your repository.

The state of the repository before you began those updates — your starting point, in effect — is the parent commit. After you commit your changes — which is the diff — that next commit would be the child commit. The diagram below explains this a little more:

Example of two commits, the parent on the left, and the child on the right.
Example of two commits, the parent on the left, and the child on the right.

In this example, I’ve added new text to a file between commits. The parent commit is the left-hand file, and the child commit is the right-hand file. The diff between them are the changes I made to a single file:

The diff is the difference between the above two commits.
The diff is the difference between the above two commits.

And a diff doesn’t just have to be additions to files; creating new content, modifying content and deleting content are other common changes that you’ll make to the files in your repository.

In Git, there are a few steps between the act of changing a file and creating a commit. This may seem like a bit of a heavy approach, at first, but, as you move through building up your commits, you’ll see how each step helps create a workflow that keeps you in tune with the files in your repository and what’s happened to them.

The easiest way to understand the process of building up commits is to actually create one. You’ll create a change to a file, see how Git acknowledges that change, how to stage that change, and, finally, how to commit that change to the repository.

Starting with a change

Open your terminal program and navigate to the ideas repository inside of the MasteringGit directory. This should be the clone of the forked repository that you created in the previous chapter.

Note: If you missed completing the challenge at the end of the Chapter 2, go back now and follow the challenge solution so that you have a local clone of the forked ideas repository to work with.

Assume that you want to add more ideas to the books file. Open books/book_ideas.md in any plaintext editor. I like to use nano since it’s quick and easy, and I don’t need to remember any obscure commands to use it.

Add a line to the end of the file to capture a new book idea: “Care and feeding of developers.” Take care to follow the same format as the other entries. Your file should look like this:

# Ideas for new book projects

- [ ] Hotubbing by tutorials
- [x] Advanced debugging and reverse engineering
- [ ] Animal husbandry by tutorials
- [ ] Beginning tree surgery
- [ ] CVS by tutorials
- [ ] Fortran for fun and profit
- [x] RxSwift by tutorials
- [ ] Mastering Git
- [ ] Care and feeding of developers

When you’re done, save your work and return to your terminal program.

In the background, Git is watching what you’re doing. Don’t believe me? Execute the following command to see that Git knows what you’ve done, here:

git status

git status shows you the current state of your working tree — that is, the collection of files in your directory that you’re working on. In your case, the working tree is everything inside your ideas directory.

You should see the following output:

~/MasteringGit/ideas $ git status
On branch master
Your branch is up to date with 'origin/master'.

Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)

	modified:   books/book_ideas.md

no changes added to commit (use "git add" and/or "git commit -a")

Ah, there’s the file you just changed: books/book_ideas.md. Git knows that you’ve modified it… but what does it mean when Git says, Changes not staged for commit?

It’s time for a short diversion to look at the various states of your files in Git. Building up a mental model of the various states of Git will go a long way to understanding what Git is doing… especially when Git does something that you don’t quite understand.

Working trees and staging areas

The working copy or working tree or working directory (language is great, there’s always more than one name for something) is the collection of project files on your disk that you work with and modify directly, just as you did in books/book_ideas.md above.

Git thinks about the files in your working tree as being in three distinct states:

  • Unmodified
  • Modified
  • Staged

Unmodified simply means that you haven’t changed this file since your last commit. Modified is simply the opposite of that: Git sees that you’ve modified this file in some fashion since your last commit. But what’s this “staged” state?

If you’re coming from the background of other version control systems, such as Subversion, you may think of a “commit” as simply saving the current state of all your modifications to the repository. But Git is different, and a bit more elegant. Instead, Git lets you build your next commit incrementally as you work, by using the concept of a staging area.

Note: If you’ve ever moved houses, you’ll understand this paradigm. When you are packing for the move, you don’t take all of your belongings and throw them loosely into the back of the moving van. (Well, maybe you do, but you shouldn’t, really.)

Instead, you take a cardboard box (the staging area), and fill it with similar things, fiddle around to get everything packed properly in the box, take out a few things that don’t quite belong, and add a few more things you forgot about.

When you’re satisfied that the box is just right, you close up the box with packing tape and put the box in the back of the van. You’ve used the box as your staging area in this case, and taping up the box and placing on the van is like making a commit.

Essentially, as you work on bits and pieces of your project, you can mark a change, or set of changes, as “staged,” which is how you tell Git, “Hey, I want these changes to go into my next commit… but I might have some more changes for you, so just hold on to these changes for a bit.” You can add and remove changes from this staging area as you go about your work, and only commit that set of carefully curated changes to the repository when you’re good and ready.

Notice above that I said, “Add and remove changes from the staging area,” not “Add and remove files from the staging area.” There’s a distinct difference, here, and you’ll see this difference in just a bit as you stage your first few changes.

Staging your changes

Git’s pretty useful in that it (usually) tells you what do to in the output to a command. Look back at the output from git status above, and the Changes not staged for commit section gives you a few suggestions on what to do:

Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)

So since you want to get this change eventually committed to the repository, you’ll try the first suggestion: git add.

Execute the following command:

git add books/book_ideas.md

Then, execute git status to see the results of what you’ve done:

~/MasteringGit/ideas $ git status
On branch master
Your branch is up to date with 'origin/master'.

Changes to be committed:
  (use "git reset HEAD <file>..." to unstage)

	modified:   books/book_ideas.md

Ah, that seems a little better. Git recognizes that you’ve now placed this change in the staging area.

But you have another modification to make to this file that you forgot about: Since you’re reading this book, you should probably check off that entry for “Mastering Git” in there to mark it as complete.

Open books/book_ideas.md in your text editor and place a lower-case x in the box to mark that item as complete:

- [x] Mastering Git

Save your changes and exit out of your editor. Now, execute git status again (yes, you’ll use that command often to get your bearings), and see what Git tells you:

~/MasteringGit/ideas $ git status
On branch master
Your branch is up to date with 'origin/master'.

Changes to be committed:
  (use "git reset HEAD <file>..." to unstage)

	modified:   books/book_ideas.md

Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)

	modified:   books/book_ideas.md

What gives? Git now tells you that books/book_ideas.md is both staged and not staged? How can that be?

Remember that you’re staging changes here, not files. Git understands this, and tells you that you have one change already staged for commit (the Care and feeding of developers change), and that you have one change that’s not yet been staged — marking Mastering Git as complete.

To see this in detail, you can tell Git to show you what it sees as changed. Remember that diff we talked about earlier? Yep, that’s your next new command.

Execute the following command:

git diff

You’ll see something similar to the following:

diff --git a/books/book_ideas.md b/books/book_ideas.md
index 76dfa82..5086b1f 100644
--- a/books/book_ideas.md
+++ b/books/book_ideas.md
@@ -7,5 +7,5 @@
 - [ ] CVS by tutorials
 - [ ] Fortran for fun and profit
 - [x] RxSwift by tutorials
-- [ ] Mastering Git
+- [x] Mastering Git
 - [ ] Care and feeding of developers

That looks pretty obtuse, but a diff is simply a compact way of showing you what’s changed between two files. In this case, Git is telling you that you’re comparing two versions of the same file — the version of the file in your working directory, and the version of the file that you told Git to stage earlier with the git add command:

--- a/books/book_ideas.md
+++ b/books/book_ideas.md

And it also shows you what’s changed between those two versions:

-- [ ] Mastering Git
+- [x] Mastering Git

The - prefix means that a line (or a portion of that line) has been deleted, and the + prefix means that a line (or a portion of that line) has been added. In this case, you deleted the space and added an x character.

You’ll learn more about git diff as you go along, but that’s enough to get you going for now. Time to stage your latest change.

It gets a bit tedious to always type the full name of the file you want to stage with git add. And, let’s be honest, most of the time you really just want to stage all of the changes you’ve made. Git’s got your back with a great shortcut.

Execute the following:

git add .

That full stop (or period) character tells Git to add all changes to the staging area, both in this directory and all other subdirectories. It’s pretty handy, and you’ll use it a lot in your workflow.

Again, execute git status to see what’s ready in your staging area:

~/MasteringGit/ideas $ git status
On branch master
Your branch is up to date with 'origin/master'.

Changes to be committed:
  (use "git reset HEAD <file>..." to unstage)

	modified:   books/book_ideas.md

That looks good. There’s nothing left unstaged, and you’ll just see the changes to books/book_ideas.md that are ready to commit.

As an interesting point, execute git diff again to see what’s changed:

~/MasteringGit/ideas $ git diff
~/MasteringGit/ideas $

Uh, that’s interesting. git diff reports that nothing has changed. But if you think about it for a moment, that makes sense. git diff compares your working tree to the staging area. With git add ., you put everything from your working tree into the staging area, so there should be no differences between your working tree and staging.

If you want to be really thorough (or if you don’t trust Git quite yet), you can ask Git to show you the differences that it’s staged for commit with an extra option on the end of git diff.

Execute the following command, making note that it’s two -- characters, not one:

git diff --staged

You’ll see a diff similar to the following:

~/MasteringGit/ideas $ git diff --staged
diff --git a/books/book_ideas.md b/books/book_ideas.md
index 1a92ca4..5086b1f 100644
--- a/books/book_ideas.md
+++ b/books/book_ideas.md
@@ -7,4 +7,5 @@
 - [ ] CVS by tutorials
 - [ ] Fortran for fun and profit
 - [x] RxSwift by tutorials
-- [ ] Mastering Git
+- [x] Mastering Git
+- [ ] Care and feeding of developers

Here’s the lines that have changed:

-- [ ] Mastering Git
+- [x] Mastering Git
+- [ ] Care and feeding of developers

You’ve removed something from the Mastering Git line, added something to the Mastering Git line, and added the Care and feeding of developers line. That seems to be everything. Looks like it’s time to actually commit your changes to the repository.

Committing your changes

You’ve made all of your changes, and you’re ready to commit to the repository. Simply execute the following command to make your first commit:

git commit

Git will take you into a rather confusing state. Here’s what I see in my terminal program:


# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
#
# On branch master
# Your branch is up to date with 'origin/master'.
#
# Changes to be committed:
#       modified:   books/book_ideas.md
#
~
~
~
~
"~/MasteringGit/ideas/.git/COMMIT_EDITMSG" 10L, 272C

If you haven’t been introduced to vim before, welcome! Vim is the default text editor used by Git when it requires free text input from you.

If you read the first little bit of instruction that Git provides there, it becomes apparent what Git is asking for:

# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.

Ah — Git needs a message for your commit. If you think back to the list of commits you saw earlier in the chapter, you’ll notice that each entry had a little message with it:

Working in Vim isn’t terribly intuitive, but it’s not hard once you know the commands.

Press the I key on your keyboard to enter Insert mode, and you’ll see the status line at the bottom of the screen change to -- INSERT-- to indicate this. You’re free to type what you like here, but stay simple and keep your message to just one line to start.

Type the following for your commit message:

Added new book entry and marked Git book complete

When you’re done, you need to tell Vim to save the file and exit. Exit out of Insert mode by pressing the Escape key first.

Now, type a colon (Shift + ; on my American keyboard) to enter Ex mode, which lets you execute commands.

To save your work and exit in one fell swoop, type wq — which means “write” and “quit” in that order, and press Enter:

:wq

You’ll be brought back to the command line and shown the result of your commit:

~/MasteringGit/ideas $ git commit
[master 57f31b3] Added new book entry and marked Git book complete
 1 file changed, 2 insertions(+), 1 deletion(-)

That’s it! There’s your first commit. One file changed, with two insertions and one deletion. That matches up with what you saw in git diff earlier in the chapter.

Now that you’ve learned how to commit changes to your files, you’ll take a look at adding new files and directories to repositories.

Adding directories

You have directories in your project to hold ideas for books, videos and articles. But it would be good to have a directory to also store ideas for written tutorials. So you’ll create a directory and an idea file, and add those to your repository.

Back in your terminal program, execute the following command to create a new directory named tutorials:

mkdir tutorials

Then, confirm that the directory exists, using the ls command:

~/MasteringGit/ideas $ ls
LICENSE		articles	tutorials
README.md	books		videos

So the directory is there; now you can see how Git recognizes the new directory. Execute the following command:

git status

You’ll see the following:

~/MasteringGit/ideas $ git status
On branch master
Your branch is ahead of 'origin/master' by 1 commit.
  (use "git push" to publish your local commits)

nothing to commit, working tree clean

Er, that doesn’t seem right. Why can’t Git see your new directory? That’s by design, and it reflects the way that Git thinks about files and directories.

How Git views your working tree

At its core, Git really only knows about files, and nothing about directories. Git thinks about a file as “a string that points to an entity that Git can track”. If you think about this, it makes some sense: If a file can be uniquely referenced as the full path to the file, then tracking directories separately is quite redundant.

For instance, here’s a list of all the files (excluding hidden files and directories) currently in your project:

ideas/LICENSE
ideas/README.md
ideas/articles/clickbait_ideas.md
ideas/articles/live_streaming_ideas.md
ideas/articles/ios_article_ideas.md
ideas/books/book_ideas.md
ideas/videos/content_ideas.md
ideas/videos/platform_ideas.md

This is a simplified version of how Git views your project: a list of paths to files that are tracked in the repository. From this, Git can easily and quickly re-create a directory and file structure when it clones a repository to your local system.

You’ll learn more about the inner workings of Git in the intermediate section of this book, but, for now, you simply need to figure out how to get Git to pick up a new directory that you want to add to the repository.

.keep files

The solution to making Git recognize a directory is clearly to put a file inside of it. But what if you don’t have anything yet to put here, or you want an empty directory to show up in everyone’s clone of this project?

The solution is to use a placeholder file. The usual convention is to create a hidden, zero-byte .keep file inside the directory you want Git to “see.”

To do this, first navigate into the tutorials directory that you just created with the following command:

cd tutorials

Then create an empty file named .keep, using the touch command for expediency:

touch .keep

Note: The touch command was originally designed to set and modify the “modified” and “accessed” times of existing files. But one of the nice features of touch is that, if a specified file doesn’t exist, touch will automatically create the file for you.

touch is a nice alternative to opening a text editor to create and save an empty file. Experienced command line users take advantage of this shortcut much of the time.

Execute the following command to view the contents of this directory, including hidden dotfiles:

ls -a

You should see the following:

~/MasteringGit/ideas/tutorials $ ls -a
.	..	.keep

There’s your hidden file. Let’s see what Git thinks about this directory now. Execute the following command to move back to the main project directory:

cd ..

Now, execute git status to see Git’s understanding of the situation:

~/MasteringGit/ideas $ git status
On branch master
Your branch is ahead of 'origin/master' by 1 commit.
  (use "git push" to publish your local commits)

Untracked files:
  (use "git add <file>..." to include in what will be committed)

	tutorials/

nothing added to commit but untracked files present (use "git add" to track)

Git now understands that there’s something in that directory, but that it’s untracked, which means you haven’t yet added whatever’s in that directory to the repository. Adding the contents of that directory is easy to do with the git add command.

Execute the following command, which is a slightly different form of git add:

git add tutorials/*

While you could have just used git add . as before to add all files, this form of git add is a nice way to only add the files in a particular directory or subdirectory. In this case, you’re telling Git to stage all files underneath the tutorials directory.

Git now tells you that it’s tracking this file, and that it’s in the staging area:

~/MasteringGit/ideas $ git status
On branch master
Your branch is ahead of 'origin/master' by 1 commit.
  (use "git push" to publish your local commits)

Changes to be committed:
  (use "git reset HEAD <file>..." to unstage)

	new file:   tutorials/.keep

You can now commit this addition to the repository. But, instead of invoking that whole business with Vim and a text editor, there’s a shortcut way to commit a file to the repository and add a message all in one shot.

Execute the following command to commit the staged changes to your repository:

git commit -m "Adding empty tutorials directory"

You’ll see the following, confirming your change committed:

~/MasteringGit/ideas $ git commit -m "Adding empty tutorials directory"
[master ce6971f] Adding empty tutorials directory
 1 file changed, 0 insertions(+), 0 deletions(-)
 create mode 100644 tutorials/.keep

Note: Depending on the project or organization you’re working with, you’ll often find that there are standards around what to put inside Git commit messages.

The early portions of this book kept things simple with a single-line commit message, but as you advance in your Git career you’ll see why following some standards like the 50/72 rule proposed by Tim Pope at https://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html will make your life easier when you get deeper into Git.

Once again, use git status to see that there’s nothing left to commit:

~/MasteringGit/ideas $ git status
On branch master
Your branch is ahead of 'origin/master' by 2 commits.
  (use "git push" to publish your local commits)

nothing to commit, working tree clean

You may have realized that all these little commits give you a piecemeal view of what Git is doing with your files. And, as you keep working on your project, you’ll probably want to see a historical view of what you’ve done. Git provides a way to view the history of your files, also known as the log.

Looking at git log

You’ve done a surprising number of things over the last few chapters. To see what you’ve done, execute the following command:

git log

You’ll get a pile of output; I’ve shown the first few bits of my log below:

commit 761a50d148a9d241712e3be4630db3dad6e010c8 (HEAD -> master)
Author: Chris Belanger <chris@example.com>
Date:   Sun Jun 16 06:53:03 2019 -0300

    Adding empty tutorials directory

commit dbcfe56fa47a1a1547b8268a60e5b67de0489b95
Author: Chris Belanger <chris@example.com>
Date:   Sun Jun 16 06:51:54 2019 -0300

    Added new book entry and marked Git book complete

commit c47084959448d2e0b6877832b6bd3ae70f70b187 (origin/master, origin/HEAD)
Author: Chris Belanger <chris@razeware.com>
Date:   Thu Jan 10 10:32:55 2019 -0400

    Going to try this livestreaming thing

commit 629cc4d309cdcfe508791b09da447c3633448f07
Author: Chris Belanger <chris@razeware.com>
Date:   Thu Jan 10 10:32:17 2019 -0400

    Some scratch ideas for the iOS team
.
.
.
.

You’ll see all of your commits, in reverse chronological order.

Note: Depending on the number of lines you can see at once in your terminal program, your output may be paginated, using a reader like less. If you see a colon on the last line of your terminal screen, this is likely the case. Simply press the Space bar to read subsequent pages of text.

When you get to the end of the file, you’ll see (END). At any point, you can press the Q key to quit back to your command prompt.

The output above shows you your own commit messages, which are useful… to a point. Since Git knows everything about your files, you can use git log to see every detail of your commits, such as the actual changes, or diff, of each commit.

To see this, execute the following command:

git log -p

This shows you the actual diffs of your commits, to help you see what specifically changed. Here’s a sample from my results:

commit ce6971fbdb945fc5fb01b739b9dea9c9ae193cae (HEAD -> master)
Author: Chris Belanger <chris@razeware.com>
Date:   Wed Jan 16 08:22:36 2019 -0400

    Adding empty tutorials directory

diff --git a/tutorials/.keep b/tutorials/.keep
new file mode 100644
index 0000000..e69de29

commit 57f31b37ea843d1f0692178c99307d96850eca57
Author: Chris Belanger <chris@razeware.com>
Date:   Fri Jan 11 10:16:13 2019 -0400

    Added new book entry and marked Git book complete

diff --git a/books/book_ideas.md b/books/book_ideas.md
index 1a92ca4..5086b1f 100644
--- a/books/book_ideas.md
+++ b/books/book_ideas.md
@@ -7,4 +7,5 @@
 - [ ] CVS by tutorials
 - [ ] Fortran for fun and profit
 - [x] RxSwift by tutorials
-- [ ] Mastering Git
+- [x] Mastering Git
+- [ ] Care and feeding of developers
.
.
.

In reverse chronological order, I’ve added the .keep file to the tutorials directory, and made some modifications to the book_ideas.md file.

Note: Chapter 6, “Git Log & History,” will take an in-depth look at the various facets of git log, and it will show you how to use the various options of git log to get some really interesting information about the activity on your repository.

Now that you have a pretty good understanding of how to stage changes and commit them to your repository, it’s time for the challenge for this chapter!

Challenge: Add some tutorial ideas

You have a great directory to store tutorial ideas, so now it’s time to add those great ideas. Your tasks in this challenge are:

  1. Create a new file named tutorial_ideas.md inside the tutorials directory.
  2. Add a heading to the file: # Tutorial Ideas.
  3. Populate the file with a few ideas, following the format of the other files, for example, [ ] Mastering PalmOS.
  4. Save your changes.
  5. Add those changes to the staging area.
  6. Commit those staged changes with an appropriate message.

If you get stuck, or want to check your solution, you can always find the answer to this challenge under the challenge folder for this chapter.

Key points

  • A commit is essentially a snapshot of the particular state of the set of files in the repository at a point in time.
  • The working tree is the collection of project files that you work with directly.
  • git status shows you the current state of your working tree.
  • Git thinks about the files in your working tree as being in three distinct states: unmodified, modified and staged.
  • git add <filename> lets you add changes from your working tree to the staging area.
  • git add . adds all changes in the current directory and its subdirectories.
  • git add <directoryname>/* lets you add all changes in a specified directory.
  • git diff shows you the difference between your working tree and the staging area.
  • git diff --staged shows you the difference between your staging area and the last commit to the repository.
  • git commit commits all changes in the staging area and opens Vim so you can add a commit message.
  • git commit -m "<your message here>" commits your staged changes and includes a message without having to go through Vim.
  • git log shows you the basic commit history of your repository.
  • git log -p shows the commit history of your repository with the corresponding diffs.

Where to go from here?

Now that you’ve learned how to build up commits in Git, head on to the next chapter where you’ll learn more about the art of staging your changes, including how Git understands the moving and deleting of files, how to undo staged changes that you didn’t actually mean to make, and your next new commands: git reset, git mv and git rm.

Have a technical question? Want to report a bug? You can ask questions and report bugs to the book authors in our official book forum here.
© 2024 Kodeco Inc.